Home Stereo Systems Speakers

MOSAIC Music Festival 2010 ...

Comparing Wired and Wireless Speakers For Home Stereo Systems

Author: Peter Watkins

Are you wondering as to the differences between home stereo wireless speakers and the wired variety? It's easy to see why more and more people want to purchase wireless speakers once you run down the advantages and disadvantages of wireless speakers as opposed to wired ones. You can get more out of wireless speakers than just being freed of the burden involved with running and hooking up wire after wire.

Home stereo wireless speakers connect the speakers to the receiver through radio frequency, through which the sound is transmitted. A lot of consumers look to wireless speakers first and foremost because of its non-wired configuration.

Those of you who have prior experience are aware of the difficulty involved with hooking up wired speakers - all of the wires that have to be checked to see if they're long enough, attaching each wire to the receiver and figuring out which end can go where. An entire day can be dedicated to this project, which can be very frustrating and aggravating. Wireless speakers can save you a lot of time, as you just need to set them where you need.

You can change the frequency of the speaker signal with knobs that are attacked to your home stereo wireless speakers. All too often, typical speakers intercept phone transmissions on the frequencies that you're using, leaving you no choice but to keep moving the speakers around until you get to a point where you don't hear the noise anymore, often having to do this several times. Wireless speakers don't have this issue; a simple frequency change can fix whatever problem you come across of that nature.

Because you don't have to worry about wire length anymore, home stereo wireless speaker placement is as easy as possible. There's no need to drag wires across the room in order to put speakers at opposite ends of the room.

You don't have to conceal wires as well, since there are no wires to speak of. No tape or throw rugs are needed to lay over the wires in order to hide them. With wireless speakers, you'll be able to place your speakers wherever you want, and your room will still be free of clutter. Your sound system will look better than ever, thanks to the wireless presentation that eliminates tangles and knots.

Article Source: http://www.articlesbase.com/electronics-articles/comparing-wired-and-wireless-speakers-for-home-stereo-systems-1630218.html

About the Author

If you want to find out who is currently offering the best deals on wireless stereo speakers, or any other speakers then visit:
http://whatspeaker.com


Posted in Sony Receivers | Tagged | 40 Comments

Home Stereo Systems For Sale

Onkyo HT-S3300 5.1-Channel ...

Shopping For Home Appliances On Sale

By Linda Polansky

People go shopping for home appliances on sale before they will purchase one offered by some retailers at full price. These sale prices might include home appliances that are marked down because they are remnants left over from last season, and need to be sold to make room for the newer models, that have different features.

All of the retailers want you to go shopping for home appliances on sale, because at least that gets you in the door, where they can try to entice you with newer models with the better features. People that keep focused on why they are in a store will leave with the sale merchandise and feel good about their purchase when they bring it into their homes.

When shopping for home appliances on sale, homeowners will visit a lot of storefronts found in Internet shopping malls, newspaper advertisement s, flea markets, local retailers, and classified advertising car ads. All of the sale advertisements in these categories will be checked against each other to see who is offering the best discount.

People search for defects in items that are reduced in price when they go shopping for home appliances on sale. With each scratch and dent that they find, they will try to negotiate a far better discount than the sales ad in their hand offers, and typically the retailer will meet their reduction request with open arms. Their logic is that the item might not sell at all, and if someone will take it for less, then their business will be better off in the long run.

Many stores have policies about using coupons on items that people find while shopping for home appliances on sale. Some retailers will allow it, so bring all of the coupons that you can through online coupon sites with you when you go shopping for home appliances on sale. These coupons might save you a delivery charge because of a free shipping offer, or take an additional 15 percent off the sale price. Some coupon offerings will give you two products for the price of one.

When people find two for one coupon, they hang on to them. These two for one coupon are rare for people to find while shopping for home appliances on sale, but with careful review of expiration dates, a retailer may have mistakenly placed his items on sale 2 or more days before a two for one coupon expires.

These are the best of times for a savvy shopper who will enjoy getting two refrigerators for the price of one, or two home stereo systems, two vacuums, or any other item that might be offered on a two for one coupon, and be on a reduced price sale at the time you go shopping for home appliances on sale. The retailer might not like the error, but you have the proof right in your hand, and they have to honor it. Their mistake will be your treasure, so it really does pay to pay careful attention to expiration dates. What you pay might definitely be the lowest price offered of any major home appliance on sale.

About the Author: Linda Polansky writes about AJMadison Coupons, HomeAnnex Discounts and HomeAppiances Savings

Source: www.isnare.com

Permanent Link: http://www.isnare.com/?aid=143900&ca=Internet


Posted in Sony Receivers | Tagged | 37 Comments

Home Stereo Systems Wireless

Compare prices for LOGITECH ...

Where To Stay In Orlando: A Hotel Or A Vacation Rental Home?

By Janice McSherry

There is no question about it, Orlando is a vacation paradise. There are enough theme parks, amusement attractions, night life and nearby places of natural beauty to keep you and your family joyfully occupied day and night. But, where should you stay, in a hotel or in a rental condo, villa or home? I am a firm believer in the value of a vacation rental home and I would like to explain the advantages that they have over hotel accommodations.

There are several things to think about and they come under the headings of comfort, convenience, and economy.

Let?s look at comfort first. The main factor that is behind the huge boom in rental homes that are being offered in the Orlando area is the fact that people are beginning to realize that just as they would not like to live their lives in crowded rooms at home, when they are on vacation they would also like to have the same spaciousness as they have at home.

The rental homes that are offered in the Orlando area are indeed spacious and comfortable. They range from two bedroom condos to huge seven bedroom villas. The condos have community pools, and the homes and villas have private pools and in many cases spas as well. The homes are fully furnished and fully equipped with air conditioning, Cable TV, DVD and stereo systems. Some of the homes also have high speed wireless Internet connections.

There?s no doubt about it, if you stay in a rental home you will have a spacious environment and you will have all the amenities that you could imagine. Now let?s look at convenience.

You can take your pick of rental homes and stay in homes or villas that are located right next to Disney World and other popular attractions. Imagine taking a ten minute ride and being at the gate of Disney World. That kind of location is convenient. Another factor that has to be considered is flexibility. When you are in a vacation home you can sleep when you like, get up when you wish, take a snack from the refrigerator or do anything that you would do in your own home. In a hotel doing all these things is not always possible or convenient.

In case you are wondering about cleaning up and maintenance, many of the rental homes are maintained by agencies that employ professional cleaning agencies to maintain the homes. When you are ready to leave, you don?t have to make the place spotless, that work will be done by the cleaning staff.

Adding to the convenience factor, vacation homes offer a degree of privacy that you will not get in any hotel.

Now let?s consider economy. Do you have a large family or need separate rooms for the kids? Well, the cost of hotel rooms can really add up, and in almost all cases you will save money and get larger accommodations if you opt for a rental condo, home or villa.

All of these factors have led to a huge growth in vacation home rental offerings in the Orlando area. Private owners as well as agencies now offer a huge selection of condos, villas and homes in this popular tourist destination. So, don?t cram your family into a small hotel room when you are in Orlando, take advantage of the economy, convenience and comfort of a vacation home or vacation condo rental.

About the Author: Janice McSherry is an Orlando vacations specialist. She is the proprietor of Homes Near Disney (http://www.homesneardisney.us) and Florida Vacation Villas (http://www.floridavacationsvillas.com). Visit her websites for deals on Vacation Rental Homes in Orlando.

Source: www.isnare.com

Permanent Link: http://www.isnare.com/?aid=262656&ca=Travel


Posted in Sony Receivers | Tagged | 39 Comments

Home Theater Amplifier Watts

 MODEL HT-391 HOME THEATER ...

Amplifier-loudspeaker Matching Formula in a Home Audio System

Author: NonameHifi Audiophile Pages

Amplifier-Loudspeaker Matching Formula in a Home Audio System

 

 

In terms of power, we compare the power of amplifier (watts) by the power handling capacity (watts) of the loudspeaker. Power capacity of the loudspeaker is measured by watts but actually the power of a speaker is measured by sound production capacity which is measured by decibel (dB). dB does not have linearity with power handling capacity (watts)

 

The electricity signal is transformed to sound energy by loudspeakers. Power handling capacity of the speaker is measured by watts but sound production capability is measured by dB. For instance there are speakers; both of them are 100 Watts. One produces 90 dB (1 mt 1watt) and other produces 93 dB. Second one does provide twice volume of sound by the same power compared the first.

 

By using the program below, you may easily calculate how much dB that you may provide by your system or you may choose your amplifier or speaker in accordance with your demand.

 

This unique software has been prepared in Ms Excel and does not have any similar one throughout world.

 

Calculation of sound volume has so many complexities. The furniture, room dimensions, floor coverings, windows, heat, humidity, number of people at the room etc my software can not provide 100% accuracy but it gives idea and guides listener through more conscious way. According to me, a full-range system should provide at least 93 dB of sound. Attacks of a symphonic orchestra may come close to such levels. So if you tend to set up a full range system, your aim should be to achieve 93 dB sound at the listening chair.

 

Input the parameters of your system to the software below and calculate what you have at your listening chair. In other words, put your desired parameters and calculate what hardware you should purchase.

 

I would like to add a foot note here that when you use the formula, result will be limited to the power of your speaker. If your power amplifier is powerful than your speaker, if yes, then input your speaker's power to formula.

For instance assume your speaker has 100 Watts of power but your amplifier has 250 Watts of power. Your sound will be limited to your speaker, hence input 100 Watts of amplifier power but not 250 Watts.

Let me know about your experiment.

Please go to link below to use formula.

http://www.nonamehifi.com/how_much_watts.xls

 

Ozhan Atalay www.nonamehifi.com

December 2004 that article can be shared by referring to www.nonamehifi.com

Copyright © NonameHifi 

Article Source: http://www.articlesbase.com/electronics-articles/amplifierloudspeaker-matching-formula-in-a-home-audio-system-497412.html

About the Author

Ozhan Atalay President www.nonamehifi.com

December 2004 that article can be shared by referring to www.nonamehifi.com

Copyright © NonameHifi


Posted in Sony Receivers | Tagged , , , , , , , , , , , , , , , , , , | Leave a comment

Home Stereo Systems Best Buy

 ... Stereo System Powerful Home

Choosing New Door Locks for Your Home

Author: Ellen Bell

From time to time, most homeowners will occasionally have to replace the entry door locks on their home.  If you are currently in the market for new doors locks, there are a number of considerations to take into account before you make your purchase.  In this article, we'll review some of the important features of home entry locks on the market today, so you can make an educated decision about what product is right for your home.

Today's door locks come in an array of colors and finishes to choose from, including finishes like Bright Brass, Antique Brass, Satin Nickel, Oil Rubbed Bronze, and more.  Many homeowners will choose a color or finish based on the finishes of other metal fixtures throughout their homes such as lights, faucets, hinges, etc.  Doing so can help maintain a consistent look throughout your home.  However, the other important consideration when it comes to finish is the longevity.  An inexpensive lock with a cheap finish will probably carry a one year warranty.  As locksets go up in price, you will also notice that the years of warranty generally increase as well.  The length of warranty you need may also depend on your geographic location.  If you live near the ocean in a salty environment, you should look for a lock with a lifetime finish.  Another consideration is whether your door handle is exposed to sunlight.  If so, UV rays may damage or fade a cheap finish very quickly.

When it comes to buying door locks, security is of course, of utmost importance.  Today, the top of the line in security are bump proof locks.  Lock bumping is a method of forced entry into a home that is gaining in popularity among thieves because it's so easy and fast, and because it leaves no signs of forced entry.  Today's bump proof locks may feature special key cylinders with pins that are impossible to pick and resistant to bumping.  However, for the best protection, you should look for locks that have no exterior keyway at all.  These locks typically feature a keypad on the outside so the homeowner can input a custom combination to open the door.

From a convenience standpoint, having a keypad door lock can be really nice, especially for families with pets and young children, or busy professionals who may not have time to mess around with keys.  Another convenient type of door lock is the remote control actuated lockset.  Much like a car remote, you carry a small remote on your keychain, then simply point it at your door and press a button to lock or unlock the door.  These uses for a remote control lock are numerous.  Handicapped persons can unlock their front door from inside the home without getting out of their chair.  You can give extra remotes to service personnel, nannies, or house cleaners.  Then each service person can get in your home as needed, but they will not have the ability to take a key to a hardware store and make a copy.  When the service contract is up, they simply turn the remote back in to you.

These are just a few of many issues to consider when you get ready to buy new locks for your home.  If you're still unsure what units might be right for you, consult the personnel at your hardware store, or contact an online or catalog retailer who offers a special selection of home security products.  A knowledgeable sales representative will be able to assist you in making the right decision.  Remember, home entry locks are a big investment, so take your time and shop carefully.  Not only do you want to get the most for your money, and that you're providing the best possible security for yourself and your family. 

Article Source: http://www.articlesbase.com/home-security-articles/choosing-new-door-locks-for-your-home-1263525.html

About the Author

Home Products 'N' More offers free shipping on all bump proof locks. To find the keyless door lock that's right for you, visit us at http://www.homeproductsnmore.com/Keyless_Door_Locks_s/59.htm


Posted in Sony Receivers | Tagged , , , , , , , | 37 Comments

Home Audio Receivers Reviews

 ... Receiver Review - eCoustics

Make Your Own Chipmunks Songs At Home

Author: Vas Blagodarskiy

We've all heard of Alvin and the Chipmunks. Youtube is flooded with song "remixes" claiming to be done by Alvin and the Chipmunks. Check out http://www.chipmunks-songs.com for some examples. They sound pretty cool! Some people are hesitant to make their own. In reality, making these remixes is just too easy. Want to learn how?

The voice change is a very basic process. If you notice, no chipmunk song sounds like it's had the voice cut out and replaced; in fact, the whole sequence has the pitch hightened. That's just it! To make your own chipmunks songs, all you have to do is increase the pitch of the MP3 file. That's it.

First, select the song you want to turn into chipmunk music. This has to be an MP3 file, you can export one right off Youtube using an online service like vid2mp3 or listentoyoutube.

Second, download Sonic Producer - a software by J Lewis, a notorious beat producer for many hip hop and rap artists. It costs .95 but it's a one-time fee, and you'll need it to make chipmunk songs. Install it and run it.

Third, import your MP3. You will be able to adjust the tempo of your song right in the software. Once you adjust it to a desirable amount (you can play with the settings and play back a sample on the spot), you can export your new chipmunk song in MP3 format!

Three easy steps, and that's it. Plus, if you're not satisfied with your purchase, Sonic Producer offers an unconditional 100% money-back guarantee. Try it now and turn your music into chipmunk songs within minutes!


Check out the resource box for the link.

 

Article Source: http://www.articlesbase.com/audio-articles/make-your-own-chipmunks-songs-at-home-1266586.html

About the Author

Vas Blagodarskiy of Sonic Producer is a freelance writer. Click here for a special discount offer.


Posted in Sony Receivers | Tagged | Leave a comment

Home Stereo Systems For Ipod

 ... ipod dock stereo system ipod

How to connect an Ipod to your home stereo

Author: Jeff Brinkley

Little is easier than playing an mp3 player or and Ipod through your home stereo. Today's ipod with their huge capacity are an excellent match for a powerful home stereo receiver. Don't forget to check into the resource box at the bottom of this page which links to my illustrated page which not only shows you which adapter you'll need, but also walks you through this simple procedure.

Other than an iPod and a home stereo system that has some sort of auxiliary input, you are going to need an adapter that will take the signal from the headphone port on your iPod and split it into a stereo signal, right and left which you can then connect to the inputs on your home stereo.

If you have a smaller shelf type stereo system, you may be limited in your choices about which input you use. Some small shelf systems may not have an auxiliary input at all. On these shelf type systems, look for a button on the front that says "aux". If there is such a button, simply plug your adapter into the "aux" jacks on the back of the stereo and choose the corresponding button on the front panel. Remember that you now have two volume controls. If you don't have the volume you think you should then make sure you don't have it turned too far down, either on your mp3 player or on the stereo. With a home stereo receiver, you will have more options when it comes to which input you use. I'm not too picky as they all tend to work fine. I just pick an input that I'm not using or I don't use too much. At this point I am using the "tape/md" input on my stereo for the iPod. I haven't used a tape player on my system in years and it's probably going to stay that way. For my illustrated page on this project please visit

http://www.squidoo.com/ipod-to-home-stereo

 

 

Article Source: http://www.articlesbase.com/music-articles/how-to-connect-an-ipod-to-your-home-stereo-2433639.html

About the Author

Jeff Is an avid do it yourselfer with 20 years experience with home repairs


Posted in Sony Receivers | Tagged , , | 38 Comments

Home Audio Theater Magazines

Audio, TV & Home Theater ...

Decorating Your Home Theater

Author: Sarah Crosset

Home theaters have become more than a luxury-they're now a standard fixture even in average homes. The setups range from simple TV-and-speaker rooms to professional-grade cinemas, but they all point to the same trend: replacing the commercial movie theater with the comfort of one's own. But to make your home theater truly your own, it takes more than high-end gear-it also needs a personal touch.

Decorating a home theater involves not just aesthetics, but also your overall viewing experience. From your choice of seating to your drapes and area rugs, your décor is what really puts the "home" in home theater. If you're just getting started, read on for some basic home theater decorating tips.

Lighting: It's important to have full control over lighting in a home theater. If you have bright walls or white area rugs, consider replacing them with darker colors to reduce reflectivity. Go for recessed lighting and wall-mounted sconces-these eliminate the glare commonly made by overhead lights. Enhance your video by placing small key lights at the back of the screen. If possible, add a dimmer switch so you can set the lighting to suit your mood.

Flooring: Area rugs offer a homier feel than carpeting, but carpets may be a better choice if you have poor room acoustics. Place some wool area rugs under or in front of the seats to soften the look of your room. To add some color, look for colorful oriental area rugs or braided area rugs you can use as a focal point. If you like sitting on the floor, consider getting a shag rug-it's one of the most comfortable and stylish options on the market.

Seating: Many furniture stores now sell sectional sofas, which are basically two or more recliner chairs linked together. Leather and suede upholstery are the most popular, but if you're on a budget, you can also go for cotton, vinyl, or polyester. You can also check for added features such as push-button recline, heating, and cup-holder armrests. If you can, create a stadium seating setup-arrange your seats in two to four rows, with the two rear rows slightly elevated.

Equipment: Most of your budget will probably go to audio and video equipment. Your home theater gear is both a personal and technical choice. If you're not that tech-savvy, have a professional check out your room and help you choose the right gear. The best display for most theaters is a drop-down projection screen; unfortunately, this is beyond most people's budgets. A good alternative is a large standard television (LCD or plasma) with surround sound-you can build up your audio system later on.

Accessories: Home theater accessories add character to your room. Most video shops now carry decorative add-ons such as movie posters, velvet drapes, and theater-style strip lights. Use red area rugs to create an old-school theater feel, or get a floor-to-ceiling shelf to show off your movie collection. Other popular accessories include mood lights, equipment cases, beverage coolers, and throw pillows.

Article Source: http://www.articlesbase.com/home-improvement-articles/decorating-your-home-theater-664285.html

About the Author

Sarah Crosset has worked in the interior decorating field for many years and loves to share her home decorating experiences and ideas with home owners everywhere. For more ideas read this article on home theater.


Posted in Sony Receivers | Tagged , , | 2 Comments

Denon Vs Onkyo Sound Quality

Onkyo TX-SR608 Home Theater ...

Denon DBP-1611UD Blu-ray Player Review

Author: Curtis Hoskins

Denon has unveiled two new Blu-ray Players to be released by June of 2010, the DBP-1611UD and the DBP-2011UDCI. What is surprising is that both will be Full HD 3D compatible. This is surprising since Denon is usually slow of the mark when it comes to new technology. Not wanting to sacrifice quality in any way. But getting on board with the 3D trend seem like a safe gamble and like past Blu-ray Players, both will be universal players.

Another change Denon is taking is a reduction in price. Denon's universal players have always been on a different price level than that of its competitors. With the DBP-1611UD, the price is listed at 9. While still higher than most entry level Blu-ray Players, but it is the lowest price for a Denon player.

The DBP-1611UD incorporates the classic Denon sturdy design. The power button is to the left and all the playback control buttons on the right, including a USB Port. The display and disc loading tray is located in the center. All other connections are located on the back of the player.

Video Quality: The DBP-1611UD can be connected via the HDMI output, the Component Outputs or the Composite Output. Like all Blu-ray Players, the HDMI connection will give you the best possible video image. The HDMI Output is the latest 1.4a version.

Audio Quality: Audio connections for the DBP-1611UD can be made through the HDMI Output, Digital Audio Outputs (Coaxial and Optical) or through the Analog Audio Outputs (2.0ch). Unfortunately it lacks the 7.1 ch analog outputs, so this could be a problem if you have an older Audio/Video Receiver without a HDMI Input. It has internal audio decoding for Dolby TrueHD, Dolby Digital, DTS-HD decoder, Dolby Digital Plus and bitstream output of Dolby TrueHD & DTS-HD Master Audio. It also has support for high resolution audio formats like DVD-Audio and SACD.

It is a Profile 2.0 player with 1 GB on internal memory, so you can access any BD-Live content found on Blu-ray discs. Movie studios can future-proof their Blu-ray discs titles. They can add more content to BD-Live Ready discs even after they have been made and shipped out. You connect your Blu-ray Player to the Internet to download images, subtitles and more. You can chat live with friends while you are both watching the movie, or play trivia games against others to unlock exclusive video content and earn discounts on other products. Even get access to live commentary. You do have to be connected to the internet to take advantage of and BD-Live content.

The DBP-1611UD has an Ethernet Port to connect to the internet. It has Online Streaming Services where you can access Netflix and YouTube. It is also DLNA certified, so you can connect to your Home Network and stream movies, music and photos from a connected computer to be displayed on your TV.

The DBP-1611UD, as stated before, is 3D Blu-ray compatible. You will not be able to use this feature until a firmware update is released in the fall of 2010. This really should not be a deterrent in purchasing the DBP-1611UD, considering there are not a lot of 3D Blu-ray content currently available. More is expected later this year and in 2011.

Key features of the Denon DBP-1611UD:

* Universal disc player (Blu-ray, DVD-Audio, SACD, DVD, CD)
* 3D Blu-ray compatible via a firmware update in the fall of 2010
* Netflix and YouTube streaming
* 1GB onboard memory
* 0 list price; will be available in June, 2010

THE PROS: The Denon DBP-1611UD is a universal Full HD 3D Blu-ray enabled and has internal audio decoding for Dolby TrueHD, Dolby Digital, DTS-HD decoder, Dolby Digital Plus. Supports DVD-Audio and SACD. Is a Profile 2.0 with 1 GB of internal memory. It is DLNA certified.

THE CONS: The price is still more than other Blu-ray Players, but cheaper the Oppo BDP-83. But since it has not been released yet, we still do not know how it will compare to Oppo's excellent Video and Audio quality. No 7.1ch analog outputs.

THE FINAL WORD: The Denon DBP-1611UD is an universal Blu-ray Player with the added features of online streaming and Full HD 3D Blu-ray playback. If the DBP-1611UD has the same Video and Audio quality that Denon is known for, than this Blu-ray Player will be worthy addition to anyone's Home Theater. -- Price you should look for when purchasing -- Under 0.00

Article Source: http://www.articlesbase.com/electronics-articles/denon-dbp-1611ud-blu-ray-player-review-2318057.html

About the Author

...
For more information on Blu-ray and Blu-ray Players try this handy comparison guide: Bluray Players Or view our Videos and Blu-ray Player Reviews here: Blu-ray Player Reviews Copyright 2010. This article may be freely distributed if this resource box stays attached.


Posted in Sony Receivers | Tagged , , , , , , | Leave a comment

Home Audio Graphic Equalizer

Black Box Lightshow: Retro ...

Jvc Th-Ba1 Soundbar Home Theater System

Author: Andrew johnson

Design

JVC has the reputation of being built for quality, however the designs do require some improvements.  The construction of this soundbar is solid with no mismatched plastic panels or molding issues.  It has a plastic housing with a metal mesh front, while the subwoofer is a wooden cabined with a fabric cover.  Overall, the weight may not be favorable for users who intend to wall-mount this system.  It also does not carry the current trend for sleek and slim designs.

There are lots of indicator lights on the sound bar to indicate different controls.  Indicators are available for power on/off, input, surround mode, and a two digit display that shows volume levels and other information such as showing SR1 when the Surround 1 mode is on.

Overall, there are four 4cm cone, full range speakers that derives 30W output each for frequency range of 84 Hz to 22 kHz in the main unit speakers. There is an analog (RCA) input port and two optical digital inputs.  It measures some 35.4" x 4.9" x 3.4" and weighs 7.8lbs.

The subwoofer speaker is a 16cm cone with 100W output for frequency range of 45 Hz to 5 kHz.  The subwoofer measures 9.5" x 13.8" x 10" and weight is 11 lbs.

Setting up the JVC TH-BA1

Setting up a sound bar is always easy.  There is an AC adapter for the center speaker unit, and the sound bar plugs directly into the wall.  However, analog audio cable is not included in purchase. The system can also be wall mounted, but mounting hardware is not within the purchase.

The manual provides a good guide and users will find it easy to navigate through with good explanations. A single cable connects the sound bar to a source, whether it be a DVD player or a Blu-Ray player, or to the tv via each systems' two digital optical inputs and one analog input.

The settings can be change using the buttons on the front panel of the sound bar, or alternatively with the remote control.  There is a master volume control to sync the center, surround and subwoofer volume.  Users may also modify these different channels independently.  There is also a fade or mute button that would lower the volume, especially useful when there is a phone call.

There are also two buttons on the remote control, one to adjust the brightness of the lights on the soundbar's front panel, and another to toggle the Dynamic Range Compression (DRC) feature that enables clearer sound quality at low volumes for Dolby Digital and DTS sources.

The wireless subwoofer, meanwhile, gives users the freedom of placement and secondly helps boost the quality of sounds.

Sound Quality

JVC TH-BA1 supports Dolby Digital, DTS and Dolby Pro Logic II Decoders. There are two surround modes, Surround 1 and Surround 2.  According to the manual, the Surround 1 option is more suited for reproduction of multi-channel sources while Surround 2 is better for stereo music sources. Users may also, alternatively, turn off the surround sound option totally.

The surround sound effect is very subtle and natural sounding, unlike many systems that creates a fake effect instead.  Overall, the audio quality is consistent with JVC's quality image, and the system is able to handle the different types of audio well and outperformed the built-in TV speakers. The quality remained consistent at various volume levels, and there is no sign of distortion even as the volume is increased to an uncomfortable level that would very often cause hissing sounds or sound breaks to other systems.

Pros and Cons

Setting up the system is easy although users may need to buy an analog audio cable since it is not included with purchase. The sound bar quality is above average and the wireless subwoofer gives freedom of placement without the hassles of wiring and cabling.  The build was good, but design a little outdated.

Conclusion

Users may find this JVC TH-BA1 system a good buy for the price it demands, yet delivering above average sound experience. Although it is true that no sound bar is able to replace true surround sound experience, this system will still give much satisfaction to the average user for what it can deliver.

Click for more information on soundbars.

Article Source: http://www.articlesbase.com/electronics-articles/jvc-thba1-soundbar-home-theater-system-1943764.html

About the Author


Posted in Sony Receivers | Tagged , , , , , , | 4 Comments